How to carry out the maintenance of traditional Chinese medicine ultrafine crusher?

The ultrafine crusher of traditional Chinese medicine has the advantages of improving the dissolution rate of effective ingredients, improving the dissolution amount of effective ingredients, and improving the uniformity of products, which is of great significance for the development of traditional Chinese medicine industry.
Choose a Chinese medicine ultrafine mill product that meets the requirements in all aspects, then in the process of Chinese medicine crushing, it will reduce a lot of unnecessary trouble, and can better crush the medicinal materials you need. But that doesn't mean all is well. In the use of traditional Chinese medicine ultrafine mill at the same time, you also need to strengthen its maintenance work.
It is understood that the maintenance of traditional Chinese medicine ultrafine mill is a very important regular work, it should be closely cooperated with operation and maintenance, etc., there should be full-time personnel on duty inspection. Traditional Chinese medicine ultrafine mill is a kind of equipment that uses air separation, heavy pressure grinding and shear to realize the ultrafine grinding of dry materials. The following points need to be done in maintenance:
The bearing carries all the load of the machine. Good lubrication has a great relationship with the life of the bearing, it directly affects the service life and operation rate of the machine, so the injected lubricating oil needs to be clean and sealed well; The newly installed tyre is easy to loose and must be checked frequently; Pay attention to whether each part of the machine is working properly; Pay attention to check the wear degree of easy to wear parts, pay attention to replace the worn parts at any time; Put the bottom plane of the mobile device, should be out of dust and other objects to avoid the machine can not break the material when the mobile bearing can not move on the bottom frame, resulting in serious accidents; Bearing oil temperature rise, should immediately stop the inspection to eliminate the reason; If there is impact sound when rotating gears are running, stop immediately for inspection and eliminate it.